Transmitter w/ 1,000 Ohm RTD (NIST Cert), Copper Averaging, 12', NEMA 3R Enclosure, 1-5VDC Output

LCD, RH3%, SET, DEG F

Transmitter w/ 1,000 Ohm RTD (NIST Cert), Low Temperature Bullet Probe, 1", 316SS, Galvanized Enclosure, 8', 2-10VDC Output

10,000 Ohm Thermistor w/11K Shunt, Pipe Mount, Brass, 20' Zip Cable

Differential Pressure, (0.5% Acc), 10, 20, 30, 40 inWC (Default), LCD, Unidirectional (Default),  Bidirectional (Selectable), Pitot Tube & DIN Rail Clip

Differential Pressure, (0.5% Acc), 10, 20, 30, 40 inWC (Default), Unidirectional (Default),  Bidirectional (Selectable), Pitot Tube & DIN Rail Clip

Differential Pressure, (0.5% Acc), 1, 2, 5, 10 inWC (Default), LCD, Unidirectional (Default),  Bidirectional (Selectable), Pitot Tube & DIN Rail Clip

Differential Pressure, (0.5% Acc), 1, 2, 5, 10 inWC (Default), Unidirectional (Default),  Bidirectional (Selectable), Pitot Tube & DIN Rail Clip

Differential Pressure, (0.5% Acc), 0.1, 0.2, 0.5, 1 inWC (Default) , LCD, Unidirectional (Default),  Bidirectional (Selectable), Pitot Tube & DIN Rail Clip

Differential Pressure, (0.5% Acc), 0.1, 0.2, 0.5, 1 inWC (Default) , Unidirectional (Default),  Bidirectional (Selectable), Pitot Tube & DIN Rail Clip

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 5% Accuracy, 100 Ohm RTD (Two Wires)

10,000 Ohm Thermistor (Type III), Setpoint, LCD

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 5% Accuracy, 10K Ohm Thermistor (Type II), Setpoint:0-10K

Wireless, Temp, Duct, 4", Trans Interval 300 sec

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room, ± 2% Accuracy, 10K Ohm Thermistor (Type III), Setpoint:0-10K, Override, Blue/Red sticker

Gas Sensor Guard

Expl Proof, Smart Sensor, Hydrogen Sulphide, 0-25 ppm, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU

LCD, RH2%, SET, O/R,RS232,DEGF

100,000 Ohm Thermistor, Copper Averaging, 8', NEMA 3R Enclosure

10,000 Ohm Thermistor (Type III), Setpoint, w/ Override, LCD