Smart Sensor replacement, Nitrogen Dioxide, 0-10 ppm

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 5% Accuracy, Transmitter w/ 100 Ohm RTD, 2-10VDC (Temp)

Transmitter w/ 1,000 Ohm RTD, Hazardous, Room (R), 2", 2-10VDC Output

M-Annunciator FOR M-Controller

100 Ohm (Two Wires) RTD, Strap On, Plastic Box

Transmitter w/ 1,000 Ohm RTD, Copper Averaging, 8', Galvanized Enclosure, 2-10VDC Output

Resistor Network (2K to 80K Ohms)

10,000 Ohm Thermistor (Type II), Setpoint, w/ Override, LCD

10,000 Ohm Thermistor, Outside Air, NEMA 4X Enclosure

0-10VDC Output, Setpoint, w/ Override, LCD

LCD, RH3%, SET, O/R, RJ6,DEG F

LCD, RH2%, SET, DEG F

1,000 Ohm (Three Wires) RTD, Bullet Probe, 1", 20' Plenum Cable

Smart Sensor, Sulpher Dioxide, 0-6 ppm, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU

Smart Sensor, Hydrogen Sulphide, 0-100 ppm, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU

Relative Humidity, RH Outputs: 0-10VDC, Wall Plate 304SS, ± 5% Accuracy, 0-10VDC Output

BACnet MSTP, Smart Sensor, Oxygen, 0-25% Volume, 3 SPDT Relays, NEMA 4X

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 1% Accuracy, 20,000 Ohm Thermistor

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 2% Accuracy, 10,000 Ohm Thermistor (E1), w/ Override

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy, 100 Ohm RTD (Two Wires), w/ Override