Transmitter w/ 1,000 Ohm RTD, Board Only, 4-20mA Output, Potted Board

Transmitter w/ 1,000 Ohm RTD (NIST Cert), Hazardous, Room (R), 2", 4-20mA Output

Transmitter w/ 1,000 Ohm RTD, Room (R) with Override, 2-10VDC Output

10,000 Ohm Thermistor (Type II), Bullet Probe, 1", 6' Plenum Cable

Transmitter w/ 1,000 Ohm RTD, Low Temperature Outside Air, 4-20mA Output

Analog input, Relay Output, 4 (SPDT) Relays, 1% Deadband

Analog input, Relay Output, 4 (SPDT) Relays, 10% Deadband

1,000 Ohm (Two Wires) RTD, Copper Averaging, 50', Galvanized Enclosure

1,000 Ohm (Two Wires) RTD, Copper Averaging, 80', Galvanized Enclosure

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 5% Accuracy, 10,000 Ohm Thermistor (CSI), w/ Override

1,000 Ohm (Two Wires) RTD, Copper Averaging, 100', Galvanized Enclosure

100,000 Ohm Thermistor, Bullet Probe, 1", 6' Plenum Cable

1,800 Ohm Thermistor, Flexible Cable Averaging, 12', Galvanized Enclosure

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 3% Accuracy, 100 Ohm RTD (Three Wires), Euro Enclosure

Pulse Width Modulate Input (60ppm), Analog Output (Selectable), (100, 1500, or 3000 Pulses/Min Selectable), Water Flow Meter Pulse

Smart Sensor, Hydrogen, 100% LEL, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU

Smart Sensor, Hydrogen, 0-2000 ppm, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU

Refrigerant Sensor, R123, 0-100 PPM, LCD, 3 x SPDT, NEMA 4X

Resistor Network (4.5K to 7.5K Ohms)

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 2% Accuracy, 10,000 Ohm Thermistor (Type III), NEMA 4X Enclosure