100 Ohm (Three Wires) RTD, Hazardous, Room (R), 2"

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy, 10K Ohm Thermistor (Type II), Setpoint:0-2K

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 3% Accuracy, 10K Ohm Thermistor (Type II), Setpoint:0-10K, Override

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy, Setpoint 0-10K and Override, Blue/Red sticker

20,000 Ohm Thermistor, Setpoint, LCD, RS232

Smart Sensor replacement, IR-Carbon Dioxide, 0-5% Volume

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 2% Accuracy, 10,000 Ohm Thermistor (E1)

1,000 Ohm Nickel RTD, Flexible Cable Averaging, 8', Plastic Enclosure

NonSilicon Grease, 16 Oz

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 2% Accuracy, 10K Ohm Thermistor (Type III), Setpoint:0-100K

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy, 10K Ohm Thermistor (Type III), Setpoint 0-20K, Override, Blue/Red sticker

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 5% Accuracy, 10K Ohm Thermistor (Type II), Setpoint:0-100K, Override

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 2% Accuracy, 10K Ohm Thermistor, w/ Setpoint & Override

LCD, RH2%, DEG F

1,000 Ohm (Three Wires) RTD, Probe Only, 8"

Resistor Network (570 to 2000 Ohms)

3,000 Ohm Thermistor, Outside Air, Sun Shield

Expl Proof, Smart Sensor, Toulene, 0-100% LEL, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU

BACnet MSTP, Smart Sensor, Diesel, 0-100% LEL, 3 SPDT Relays, NEMA 4X

Transmitter w/ 1,000 Ohm RTD, Bullet Probe, 1", 6' Plenum Cable, Plastic Enclosure, 4-20mA Output