Transmitter w/ 1,000 Ohm RTD (NIST Cert), Outside Air, NEMA 3R Enclosure, 4-20mA Output

Transmitter w/ 1,000 Ohm RTD,  316SS Probe, Freezer, 30' Leads, NEMA 4X Enclosure, 30', 1-5VDC Output

Resistor Network (9.3K to 14.9K Ohms)

Resistor Network (300 to 800 Ohms)

Smart Sensor, Hydrogen Chloride, 0-30 ppm, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 2% Accuracy, 10,000 Ohm Thermistor (Type III), Sun Shield

Relative Humidity, RH Outputs: 0-5 VDC, Wall Plate 304SS, ± 3% Accuracy, 10,000 Ohm Thermistor (Type II), 0-5VDC

Analog Input (0-5VDC), Pressure Output (0-15PSI), Single Valve, 0.007" Bleed Orifice, Gauge, (0-10V, 0-15V, 0-20mA Selectable)

Transmitter w/ 1,000 Ohm RTD, Board Only, NEMA 4X Enclosure, 4-20mA Output, Potted Board

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 2% Accuracy, Transmitter w/ 100 Ohm RTD, Sun Shield, 4-20mA (Temp)

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, NEMA 3R Enclosure, ± 5% Accuracy (NIST Cert), Transmitter w/ 1000 Ohm RTD (NIST Cert), 4-20mA (Temp Output)

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy, Transmitter w/ 100 Ohm RTD, 2-10VDC (Temp Output)

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 2% Accuracy, 10K Ohm Thermistor (Type III), Custom Logo

Transmitter w/ 1,000 Ohm RTD (NIST Cert), Copper Averaging, 80', Galvanized Enclosure, 4-20mA Output

10,000 Ohm Thermistor (Type III), Setpoint, LCD

3,000 Ohm Thermistor, Bullet Probe, 1", 20' Zip Wire

100 Ohm (Two Wires) RTD, Hazardous, Room (R), 2"

20,000 Ohm Thermistor, Bullet Probe, 1", 10' Plenum Cable

Outside Air Pickup Port, Horizontal, NEMA 3R

Outside Air Pickup Port, Vertical, NEMA 3R