A/ENT - ACI
Automation Field Components
Enthalpy, 0-50K BTU, 4-20mA
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
122439
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/ENT - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The A/ENT is an enthalpy controller which is typically used in conjunction with the A/DIFF-ENT. The A/ENT converts a capacitive type humidity sensor into a linear 2-wire, 4 to 20 mA output. Its signal is proportional to a scale of 0 to 50 BTU's and is geared towards OEMs of economizers and other devices that require an enthalpy input or economizer control. Each unit in this series features a coated circuit board and jumper selectable elevation settings. The A/ENT is covered by ACI's Five (5) Year Limited Warranty.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/1K-2W-I-4'-BB-NIST - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Immersion, Welded Well, 4', NEMA 3R Enclosure, NIST Cert
A/TTM1K-INW-12'-4-EXPL - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Hazardous, Immersion, No Well, 12', 4-20mA Output'
A/1/4' COMPRESSION FITTING - ACI
Automation Field Components
1/4' Compression Fitting
A/1.8K-DO-8'-6'CL2P - ACI
Automation Field Components
1,800 Ohm Thermistor, Duct, Without Box, 8', 6' Plenum Cable
A/100-3W-D-8'-PB - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Duct, 8', Plastic Enclosure
ACUCT-H040-50:333 - ACI
Automation Field Components
Current Transformer, 50A, Hinged Split Core, 0.4" Aperture, 333mV Output, 2.5m Leads
AFP VERSION #7 - ACI
Automation Field Components
Analog Input (0-5VDC), Floating Point Output (30 sec), Version #6, (60, 90s Selectable), Drives actuator up 105% of range
EFP - ACI
Automation Field Components
Floating Point Input (45 sec), Pressure Output (0-15PSI), Single Valve, 0.007" Bleed Orifice, (90, 60, 120 sec), (0-15PSI, 0-20PSI)