A/LLS-T(0-100) - ACI
Automation Field Components
Light Level Sensor w/ Transmitter, 0 to 100 f.c., NEMA 3R Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
122467
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/LLS-T(0-100) - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The light level sensor and transmitter is to be used for applications such as turning on or off indoor or outdoor lighting based upon the amount of available light. These sensors are not to be used in applications such as green houses where the actual amount of light is monitored. The sensor can be mounted in a NEMA 3R rated enclosure and has a resistance in darkness in excess of 1M ohms versus a resistance in bright light of less than 1.5K ohms. The A/LLS-T incorporates a transmitter with the sensor to produce a non-linear 4-20 mA output signal. The A/LLS-T is calibrated for 4 mA in darkness and 20 mA in bright light. The A/LLS is covered by ACI's Five (5) Year Limited Warranty.
- Indoor and outdoor applications
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/10K-E1-INW-6'-GD - ACI
Automation Field Components
10,000 Ohm (E1) Thermistor, Immersion, No Well, 6', Galvanized Enclosure
A/1.8K-INW-2.5'-BB - ACI
Automation Field Components
1,800 Ohm Thermistor, Immersion, No Well, 2.5', NEMA 3R Enclosure
A/CSI-D-8'-PB - ACI
Automation Field Components
10,000 Ohm (CSI) Thermistor, Duct, 8', Plastic Enclosure
A/1K-NI-PM-10'CL2P - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Pipe Mount, Brass, 10' Plenum Cable
A/ULT-003-4X-10-TB853 - ACI
Automation Field Components
(2)Transmitters w/1,000 Ohm RTD, Low Temperature 2" Probe, 316SS, 10' Plenum Cable, 4X, 4-20mA, 8.5 oz Bottle w/ Glass Beads (Three Sensor Wells), NIST Cert
A/RH3-1K-2W-SP-010 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-10VDC, Wall Plate 304SS, ± 3% Accuracy, 1,000 Ohm RTD (Two Wires), 0-10VDC Output
A/10KS-O-EH - ACI
Automation Field Components
10,000 Ohm Thermistor, Outside Air, Euro Enclosure
EFP2GFS - ACI
Automation Field Components
Floating Point Input (45 sec), Pressure Output (0-15PSI), Dual Valve, Exhausts on Power Failure, Gauge, (90, 60, 120 sec), (0-15PSI, 0-20PSI)