AIM1.1 - ACI
Automation Field Components
ANALOG ISOLATION MODULE 1:1
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
145185
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
AIM1.1 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
Analog Input to Optically Isolated Analog Output The AIM1.1 optically isolates an analog (voltage or current) input signal from its corresponding output signal. The factory calibrated output is linear and proportional (1:1 ratio) to the input signal. The AIM1.1 will accept a 0 to 5 VDC, 0 to 10 VDC, or 0 to 20 mA input span and output any one of those same ranges. It requires one external 24 VAC isolation transformer with floating secondary for power and has an onboard 24 VAC isolation transformer to supply the isolated output.
Applications: Grounded Electrical Actuator Isolation, Florescent Light Dimmer Isolation, Ground Loop Isolation, Variable Frequency Motor Drive Isolation, General Analog Signal Input and Output Isolation
The AIM1.1 is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/DLP-010-W-U-N-B-1-A-0P-S - ACI
Automation Field Components
Differential Low Pressure, 10 inWC, Unidirectional, No Display, 0.25% Accuracy, w/ Pitot Tube, 4-20mA Output, No Nist, Standard
A/RH3-CP-R2S-A03-C5 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy, 10K Ohm Thermistor (Type II), Setpoint:0-10K
A/RH5-AN-R2O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 5% Accuracy, 10K Ohm Type III Thermistor, w/ Override
A/RH3-1K-2W-D-4X - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 3% Accuracy, 1,000 Ohm (Two Wires) RTD, NEMA 4X Enclosure
A/TT100-O-4-EH - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Outside Air, Euro Enclosure, 4-20mA Output
EPW VERSION #4 - ACI
Automation Field Components
Pulse Width Modulation Input (2.93 sec), Pressure Output (0-15PSI), Single Valve, 0.007" Bleed Orifice, Version 4, (10, 5, 25 sec Selectable), (0-10PSI, 0-20PSI), Reverse Acting
A/RH5-10KS-D - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 5% Accuracy, 10,000 Ohm Thermistor, Euro Enclosure
A/AN-S-GD - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Strap On, Galvanized Enclosure