QTS-17101X-S000000 - ACI
Automation Field Components
Expl Proof Sensor, Methane, 0-100% LEL, 4-20mA Output
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
136148
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
QTS-17101X-S000000 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The QTS-1710 Series utilizes a standard pellistor-bead technology for the measurement of combustible gases. The sensor is resistant to poisoning substances such as Silicones, Sulphur and Chlorinated compounds. The Sensor is mounted to an explosion-proof housing while the transmitter provides a 3-wire, linear 4 to 20 mA output signal that is proportional to the LEL (Lower Explosive Limit) of the calibrated combustible gas. Test jacks are provided to monitor the transmitter signal without having to interrupt the output signal and Zero and Span adjustments allow for eld calibration. Calibration and bump testing should be completed every three months in all combustible or explosive atmospheres. Calibration gases and 0.5 liter/minute gas regulators are not available through ACI.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/CP-RA-12'-EH-NIST - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Rigid Probe Averaging, 12', Euro Enclosure, NIST Cert
A/CP-D-18'-GD-NIST - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Duct, 18', Galvanized Enclosure, NIST Cert
A/TTM100-I-6'-4-4X - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Immersion, Welded Well, 6', NEMA 4X Enclosure, 4-20mA Output
PT 9.7' - ACI
Automation Field Components
Total Pressure Pitot Tube with Foam Gasket, 9.7'
A/AN-INW-2.5'-BB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Immersion, No Well, 2.5', NEMA 3R Enclosure
A/100-2W-I-2.5'-GD - ACI
Automation Field Components
100 Ohm (Two Wires) RTD, Immersion, Welded Well, 2.5', Galvanized Enclosure
RCT16-2500 - ACI
Automation Field Components
16" Rogowski Coil, 12.5 to 3000A, 4.17" Window, Output@1000A = 40mV@50Hz / 48mV@60Hz, 6.5 ft Leads
A/RH5-1.8K-O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 5% Accuracy, 1,800 Ohm Thermistor, Euro Enclosure